-
- Arduino, Development Boards, Modules, Programmers
NodeMCU ESP8266 v3 CH340 Lua WIFI Board
- KSh 800.00
- NodeMCU is an open-source Lua based firmware and development Board specially targeted for IoT based Applications. It includes firmware that runs on the ESP8266 Wi-Fi SoC Systems, and hardware which is based on the ESP-12 module. The Board can be easily programmed with Arduino IDE since it is easy to use.
- Add to cart
-
- 3D Assets, Autocad file
Nut and Bolt 3D autocad free dwg file download
- KSh 0.00
- Nut and Bolt 3D autocad free dwg file download. This product is dwg file free to download. Once downloaded, you are free to use this product without any restrictions.
- Add to cart
-
- Arduino
OV7670 Camera Module For Arduino
- KSh 500.00
- Features of OV7670 Camera Module For Arduino It has a High sensitivity for low light operation It has a Low Operating voltage Has an Optical size of 1/6 inch Resolution 640*480 VGA Additionally, it has an On board Regulator Lens shading correction Flicker(50/60Hz) auto detection Standard 0.1 inch (2.54mm) pin pitch header connector It Supports image sizes of VGA, CIF,…
- Add to cart
-
- Microcontrollers, Programmers
PIC16F630 Microcontroller 14 Pins DIP
- KSh 200.00
- 47uF Radial Electrolytic Capacitor has polarity. That is, it has both a positive and negative pin. The long pin is the positive while the short pin is the negative. Polarity can also be identified using the negative strip on the capacitor label. The negative pin will be directly under the negative symbol.
- Add to cart
-
- Out of Stock
- Programmers
PICKIT 3 Programmer/debugger + Programming Adapter
- KSh 3,800.00
- The PICkit 3 is used in programming and debugging PIC microcontrollers. It uses the MPLAB IDE for programming and debugging. It is similar in function to the PIC kit 2 in-circuit debugger system. However, PICkit 3 it differs from the PIC-kit 2 by having an extended EE program image space. It as well provides the the true voltage reference as…
- Read more
-
-
- Arduino, Electronic components, Sensors
Piezoelectric active Buzzer beep sounder for alarm
- KSh 30.00
- Piezoelectric  active buzzer adds sound features to your project. It can be easily used on breadboard, Perf Board and even on PCBs. It widely used in electronics. When powered, it will make a beep sound. The sound is due to the internal oscillating circuit inside it.
- Add to cart
-
- 3D Assets, Autocad file
Pipe and Tap 3D autocad free dwg file
- KSh 0.00
- Solar Battery 3D autocad free dwg file download. This product is dwg file free to download. Once downloaded, you are free to use this product without any restrictions.
- Add to cart
-
- Out of Stock
- Valves
Pressure Cooker Safety Valve Relief Valve
- KSh 350.00
- Read more
-
-
- Arduino
Pro Mini ATMEGA328P 16 MHz 5V for Arduino
- KSh 750.00
- Features 1. 14 digital input/output port RX and TX, D2 ~ D13, 2. 8 analog input port A0 ~ A7 3. 1 to the TTL level a serial port to send and receive port RX/TX 4.6 a PWM port, D3, D5, D6, D9, D10, D11 5. Using Atmel Atmega328P - AU microcontroller 6. Support serial download 7. Support external 3.3…
- Add to cart
-
- Switches
Protable Momentary Push Button 2 pins
- KSh 50.00
- Protable momentary push Button 2 pins is for Projects. Besides, it has two pins and is not difficult to use.
- Add to cart
-
- Sensors
Pulse sensor heart beat sensor for Arduino
- KSh 700.00
- Pulse sensor is used to test the heart rate. It is used to develop heart related and interactive works. It is worn either on the finger or earlobe.
- Add to cart
-
- Moisture sensors, Sensors
Rain Drop Sensor module for Arduino
- KSh 100.00
- Rain drop sensor module is used for rain detection. It can also be used as a switch when raindrop falls through the raining board.
- Add to cart
-
- Out of Stock
- Programmers, Raspberry Pi
Raspberry pi Case for Raspberry Pi B and B+
- KSh 500.00
- Raspberry pi Case provides the protective housing for you Pi board.
- Read more
-
-
- Raspberry Pi
Raspberry Pi Heat Sinks 3 pieces Heat dissipator
- KSh 150.00
- 74HC05 is a high-speed Si-gate CMOS device. It contains six inverters. The device has also outputs that are open-drain. Therefore, can be connected to other open-drain outputs to implement active-LOW wired-OR or active-HIGH wired-AND functions. 74HC05 Â suitable for use in automotive applications.
- Add to cart
-
- Out of Stock
- Uncategorized
Raspberry Pi Power Adapter 5V 3A
- KSh 2,000.00
- Raspberry pi Power Adapter. Convenient to power your Pi board and provides a constant current of 3 A.
- Read more
-
-
- Electronic components, LEDs
Red diffused LED 5mm Light Emitting Diode
- KSh 5.00
- Red diffused LED 5mm is a two-lead semiconductor light source. It emits lights when activated.
- Add to cart
-
- Modules
Relay Module 1 channel interface Shield
- KSh 150.00
- This Relay Module is 1 channel interface. It complies with the international safety standards. The module can control 220V AC load. It has a normally open and a normally closed contact. The KF301 terminals to the line of control is more convenient.
- Add to cart
-
- Resistors
Resistor kit Metal Film 30 Values* 20 pcs
- KSh 500.00
- Features of Resistor kit 1% 1/4 W Metal Film Resistor Assorted Kit 30 Values Total 600 pcs 20 pcs Each 1% tolerance Quantity: 30 values x 20 pcs=600 pcs
- Add to cart
-
- Arduino, Electronic components, Sensors
RFID Module 13.56MHz RC522 for Arduino
- KSh 500.00
- Features of RFID Module 13.56MHz RC522 includes; MFRC522 chip based board Operating frequency of 13.56MHz Supply Voltage of 3.3V Current of 13-26mA Read Range of 3 cm SPI Interface Moreover, has a max data transfer rate of 10Mbit / s  Lastly, it has dimensions of 60mm × 39mm
- Add to cart
-
- Electronic components, Potentiometers
RM065 Trimpot Potentiometer 500Ω (501)
- KSh 10.00
- RM065 Trimpot Potentiometer is a variable resistor. It is small sized as well as light weight.
- Add to cart
-
- Modules, Potentiometers
Rotary Encoder Module for Arduino Incremental
- KSh 100.00
- Rotary Encoder Module is used to measure the rotational speed. It converts the angular motion of a shaft to digital code. Also used for quick speed control with PWM technology. An incremental rotary encoder outputs the corresponding pulses. Hence supports multiple circles of rotation measured. It differs from potentiometer in that the counting is unrestricted.
- Add to cart
-
- Electronic components, Transistors
S8050 Bipolar Junction Transistor (BJT) NPN
- KSh 10.00
- Bipolar Junction Transistor (BJT) NPN
- Add to cart
-
- Electronic components, Transistors
S8550 Bipolar Junction Transistor (BJT) PNP
- KSh 10.00
- Bipolar Junction Transistor (BJT) PNP
- Add to cart
-
- Transistors
S9012 PNP Epitaxial Silicon Transistor
- KSh 10.00
- Features of S9012 include; It has an Excellent linearity Has a Collector-Emitter Voltage of -25 V Also has a Collector Current of -0.5 A It also has a Collector-Base Voltage of -40 V Has an Emitter-Base Voltage of -5 V To add on that, has a Collector Capacitance of 5 pF Moreover, has a Transition Frequency is 150 MHz Last…
- Add to cart
-
- Transistors
S9013 NPN Epitaxial Silicon Transistor
- KSh 10.00
- Features of S9013 include; It has an Excellent linearity Has a Collector-Emitter Voltage of 25 V Also has a Collector Current of 0.5A It also has a Collector-Base Voltage of 40 V Has an Emitter-Base Voltage of 5 V To add on that, has a Collector Capacitance of 5 pF Moreover, has a Transition Frequency is 150 MHz Last but…
- Add to cart
-
- Transistors
S9014 NPN General Purpose Transistors
- KSh 10.00
- Features of S9014 includes; Pre-Amplifier, Low Level, Low Noise NPN Transistor It has a Current Gain (hFE) of 60 to 1000 (good linearity) Has a Continuous Collector current of 100mA Has a Collector-Emitter Voltage of 45 V It also has a Collector-Base Voltage of 50V Has an Emitter-Base Voltage of 5 V Moreover, has a Transition Frequency is 150 MHz…
- Add to cart
-
- Transistors
S9015 PNP General Purpose Transistor
- KSh 10.00
- Features of S9015 include; It has an Excellent linearity Has a Collector-Emitter Voltage of -45 V Also has a Collector Current of -100 mA It also has a Collector-Base Voltage of -50 V Has an Emitter-Base Voltage of -5 V To add on that, has a Collector Power Dissipation of 0.2 W Moreover, has a Transition Frequency is 150 MHz…
- Add to cart
-
- Transistors
S9018 NPN Epitaxial Silicon Transistor
- KSh 10.00
- Features of S9018 include; Has a Collector-Emitter Voltage of 15 V Also has a Collector Current of 50 mA It also has a Collector-Base Voltage of 30 V Has an Emitter-Base Voltage of 5 V To add on that, has a Collector Power Dissipation of 400 mW Moreover, has a Transition Frequency is 600 MHz Last but not least, has…
- Add to cart
-
- Out of Stock
- Humidity Sensor, Sensors, Temperature sensor
Sensor AM2302 DHT22 module Temperature Humidity (JST)
- KSh 3,000.00
- Read more
-
-
- Arduino, Modules
Sensor Shield expansion board for arduino
- KSh 500.00
- Features; Ad hoc IIC interface Has a stack design Both analog and digital Interface It has a Servo Controller Interface The sensor has a Bluetooth Module A communication interface SD card module interface module Also has an APC220 RF Module interface Moreover, it has an ultrasonic sensors Interface Lastly, has a 12864 LCD Serial interface
- Add to cart
-
- Out of Stock
- Displays, Modules
Serial I2C module for the Liquid crystal displays (LCDs
- KSh 200.00
- Read more
-
-
- Actuators, Arduino, Electronic components
SG90 Plastic Gear Microservo Motor
- KSh 350.00
- Features of SG90 Plastic Gear Microservo includes; Has an Operating Speed of (4.8V no load) at 0.12 seconds / 60 degrees (4.8V) Has a Stall Torque of 1.6 kg / cm (4.8V) Operates at a Temperature Range of -30° to +60° Operating Voltage of 3.0-7.2 Volts Also has Plastic Gears In addition, it has a dead band width of 10…
- Add to cart
-
- Proteus Assets
Sim800L Buck-Converter Proteus PCB Circuit
- KSh 0.00
- Sim800L Buck-Converter Proteus PCB Circuit made easy for you. Just download, print and do the etching/engraving. Free of charge.
- Add to cart
-
- GPS_GSM_GPRS
SIM800L GPRS GSM Module spring Antenna
- KSh 1,000.00
- Features of Micro SIM800L GPRS GSM Module: Chip: SIM800LÂ Voltage: 3.7 -4.2 V Support Global quad-band network Module size: 2.5 cm x 2.3 cm TTL serial port for serial port, you can link directly to the microcontroller. No need for MAX232 Power module automatically boot, homing network Onboard signal lights all the way. It flashes slowly when there is a…
- Add to cart
-
- Out of Stock
- GPS_GSM_GPRS
SIM800L GSM GPRS Module with Antenna
- KSh 1,500.00
- Features: High Quality With Antenna Model: SIM800L Working voltage: 3.7~5 V Network support: Quad-Band 850 / 900/ 1800 / 1900 MHz Work on GSM networks in all countries across the world. TTL serial interface compatible with 3.3 V and 5 V for MCU Microcontrollers
- Read more
-
-
- Electronic components, Potentiometers
Single Turn Potentiometer 100KΩ
- KSh 30.00
- The Single Turn Potentiometer is a three terminal variable resistor. In addition, its circuit system is similar to that used in voltage dividers.
- Add to cart
-
- Electronic components, Potentiometers
Single Turn Potentiometer 2MΩ for Arduino
- KSh 30.00
- The Single Turn Potentiometer is a three terminal variable resistor. In addition, its circuit system is similar to that used in voltage dividers.
- Add to cart
-
- Electronic components, Potentiometers
Single Turn Potentiometer 5KΩ
- KSh 30.00
- The Single Turn Potentiometer is a three terminal variable resistor. In addition, its circuit system is similar to that used in voltage dividers.
- Add to cart
-
- Robotics
Smart Car Robot Tyre 65mm wheel
- KSh 500.00
- This is a Robot Smart Car Tyre suitable for you DIY projects. The tyre is 65 mm in diameter and 26 mm in width.Â
- Add to cart
-
- 3D Assets, Autocad file
Smart Phone 3D autocad free dwg file download
- KSh 0.00
- Smart Phone 3D autocad free dwg file download. This product is dwg file free to download. Once downloaded, you are free to use this product without any restrictions.
- Add to cart
-
- Integrated Circuits
SN74LS32P Quad 2-input positive-OR gates
- KSh 100.00
- The Single Turn Potentiometer is a three terminal variable resistor. In addition, its circuit system is similar to that used in voltage dividers.
- Add to cart
-
- Integrated Circuits
SN74LS47N BCD to Seven Segment Decoder/Driver
- KSh 150.00
- Features of SN74LS47N includes; It has a Lamp Intensity Modulation Capability (BI/RBO) It also has as Open Collector Outputs Also has a Lamp Test Provision To add on that, has a Leading/Trailing Zero Suppression Lastly, has Input Clamp Diodes Limit High Speed Termination Effects
- Add to cart
-
- Integrated Circuits
SN74LS48N BCD TO 7 SEGMENT DECODER
- KSh 200.00
- Features of SN74LS48N It has a Lamp Intensity Modulation Capability It also has Internal Pull Ups Eliminate Need for External Resistors Input Clamp Diodes Eliminate High Speed Termination Effects
- Add to cart
-
- Out of Stock
- Arduino, Humidity Sensor, Moisture sensors, Sensors
Soil Moisture Sensor for Arduino Board
- KSh 150.00
- Soil Moisture Sensor is used to measure the soil moisture gain or loss over a period of time. It depends on the permittivity of the surrounding medium to determine the moisture content. In addition, it  automates the irrigation systems.
- Read more
-
-
- 3D Assets, Autocad file
Solar Battery 3D autocad free dwg file
- KSh 0.00
- Solar Battery 3D autocad free dwg file download. This product is dwg file free to download. Once downloaded, you are free to use this product without any restrictions.
- Add to cart
-
- 3D Assets, Autocad file
Solar Charge Controller 3D autocad free dwg file
- KSh 0.00
- Solar Battery 3D autocad free dwg file download. This product is dwg file free to download. Once downloaded, you are free to use this product without any restrictions.
- Add to cart
-
- 3D Assets, Autocad file
Solar Panel 3D autocad free dwg file download
- KSh 0.00
- Solar Battery 3D autocad free dwg file download. This product is dwg file free to download. Once downloaded, you are free to use this product without any restrictions.
- Add to cart
-
- 3D Assets, Autocad file
Solar Panel+Rack 3D autocad free dwg file
- KSh 0.00
- Solar Battery 3D autocad free dwg file download. This product is dwg file free to download. Once downloaded, you are free to use this product without any restrictions.
- Add to cart
-
- Uncategorized
Solarmax Power Inverter 300W Converter
- KSh 3,500.00
- SolarMax Power Inverter 300W. Compactly and stylishly designed with a modified sine wave inverter that operates silently.
- Add to cart
-
- Out of Stock
- Soldering Equipment
Solder Iron Tips + Solder Iron Stand
- KSh 500.00
- The Single Turn Potentiometer is a three terminal variable resistor. In addition, its circuit system is similar to that used in voltage dividers.
- Read more
-
-
- Out of Stock
- Valves
Solenoid Valve 1/2″ Plastic 12V DC
- KSh 1,000.00
- This Solenoid Valve has the following features; Normally closed Voltage: 12V DC Â G1/2 " size Pressure range: 0.02 ~ 0.8 Mpa
- Read more
-
-
- Speaker
Speaker 15W 4 Ohm HiFi Full-Range
- KSh 250.00
- Speaker 15W 4 HiFi full-range speaker will be your best choice in DIY speaker. Work well for home audio-visual equipment. Unique design: adopted well-performed magnet, 20mm big voice coil, fatigue blended elastic wave, exponential type cone and imported rubber coil.
- Add to cart
-
- Cables, Wire
Speaker Cable 1.5 mm Oxygen Free Copper OFC NXC-15T
- KSh 20.00
- Speaker Cable 1.5 mm Oxygen Free Copper OFC . These speaker cables are made from the highest quality materials using Oxygen free copper.
- Add to cart
-
- Programmers
ST Link V2 Mini STM8 STM32 Programmer
- KSh 1,100.00
- Features of ST Link V2 includes; It has an Onboard 500mA self recovery fuse to avoid harming by short circuit Has a Dual voltage output of 3.3V to 5V In addition to that, It is easy for debugging/programming Also has a Standard USB interface for direct connection to PC
- Add to cart
-
- Microcontrollers, Modules, Programmers
STM32 Minimum System Development Board Module
- KSh 700.00
- The STM32 is a family of 32-bit Flash microcontrollers. It is based on the ARM® Cortex®-M processor designed to offer new degrees of freedom to MCU users. It offers a 32-bit product range that with very high performance.
- Add to cart
-
- PCB
Stripboard Vero prototype print Circuit Board
- KSh 80.00
- Stripboard Vero prototype print Circuit Board is ideal for development and prototyping work.Designed primarily for hard wiring of discrete components mostly in analogue circuits. It can also be used where a number of common bus or signal lines are needed. The board is made from copper clad laminated board which has been pierced with a grid of holes and machined.…
- Add to cart
-
- Out of Stock
- Pumps
Submersible Water Pump 700L/H DC 12V Electric Powered
- KSh 2,500.00
- Specifications Black in color The main material is ABS (Acrylonitrile Butadiene Styrene) and Stainless Steel Size is Approx. 80 x 48 x 63 mm/3.15 x 1.89 x 2.48'' Has a Pump Inlet Diameter of 16 mm(Outer), and 12 mm (Inner) Also has a Pump Outlet Diameter of 12 mm(Outer), and 6.9 mm (Inner) Inlet / Outlet of 1/2" male thread…
- Read more
-
-
- Capacitors
Super Capacitor 2.7 V 500F Farad Capacitor
- KSh 1,000.00
- Features: Size is 35 * 60 (mm) Capacitance value of 500F Tolerance of -10% to + 20% Voltage of 2.7 V Operating temperature of -40 ° C ~ 60 ° C
- Add to cart
-
- Transistors
SVF4N65F TO-220F 650V 4A MOSFET
- KSh 50.00
- 1000uF Radial Electrolytic Capacitor has polarity. That is, it has both a positive and negative pin. The long pin is the positive while the short pin is the negative. Polarity can also be identified using the negative strip on the capacitor label. The negative pin will be directly under the negative symbol.
- Add to cart
-
- Modules, Sensors, Vibration sensor
SW-420 Vibration Sensor Module for Arduino
- KSh 150.00
- Features of SW-420 Vibration Sensor Module Has a working voltage of between 3.3 V to 5 V It has a Digital switch output 0 and 1 Also Equipped with fixed bolt hole. Therefore, has a convenient installation Moreover, has a PCB size of 3.2 cm x 1.4 cm LM393 wide voltage comparator Operating Current of 15mA Also has LEDs indicating…
- Add to cart
-
- Mosftets
TC4420CPA 6A High Speed Mosfet Driver
- KSh 100.00
- Features of TC4420CPA Logic Input Will Withstand Negative Swing Up To 5V Matched Rise and Fall Times: - 25 ns (2500 pF load) High Peak Output Current of 6A Wide Input Supply Voltage Range: - 4.5V to 18V High Capacitive Load Drive Capability: 10,000 pF Short Delay Time: 55 ns (typ.) Low Supply Current With Logic ‘1’ Input: - 450…
- Add to cart
-
- Mosftets
TC4424 3A Dual High Speed Power Mosfet Driver
- KSh 200.00
- Features of TC4424 High Peak Output Current of 3A Wide Operating Range of 4.5V to 18V High Capacitive Load Drive Capability of 1800 pF in 25nsec Short Delay Times of 40nsec Typ Matched Rise/Fall Times Low Supply Current — With Logic "1" Input - 3.5 mA — With Logic "0" Input -350 µA Low Output Impedance of 3.5Ω Typ Also…
- Add to cart
-
- Modules, Sensors
TCS3200 Color sensor Color recognition module
- KSh 900.00
- Features of TCS3200 Color sensor Input voltage of 2.7V to 5.5V Digital TTL Interface High resolution conversion of light intensity to frequency Programmable colour and full scale output frequency It is directly connected to the digital pins of the microcontroller. Hence no need of ADC Has a Power down feature Working temperature of -40oC to 85oc Programmable color and full-scale…
- Add to cart
-
- Out of Stock
- Microcontrollers, Programmers
The Raspberry pi 3 B+ Model development board
- KSh 7,000.00
- Specifications of Raspberry Pi 3 B+ Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4 GHz 1 GB LPDDR2 SDRAM 2.4 GHz and 5GHz IEEE 802.11.b/g/n/ac Wireless LAN, Bluetooth 4.2 (BLE) Gigabit Ethernet over USB 2.0 (300 Mbps) The extended 40 pins GPIO header Full size HDMI 4 USB 2.0 ports CSI camera port for connecting a Raspberry Pi camera DSI…
- Read more
-
-
- Sensors
Tilt Vibration Sensor Module Vibration Switch Alarm Module
- KSh 150.00
- Tilt Vibration Sensor Module is a device used for knowing the planar movement. That means it detects the plane shift from horizontal to vertical then sends a signal when it happens.
- Add to cart
-
- Transistors
TIP31C Silicon NPN Power Transistor
- KSh 100.00
- Features and Specifications of TIP31C It is a Medium power transistor It has a hfe gain of up to 50 and hfe improved linearity Has a Maximum voltage across collector and emitter of 100V Collector allows a maximum current of 3A DC through Across base and emitter Maximum voltage of 5 V Maximum current allowed through the transistor base is 1A…
- Add to cart
-
- Transistors
TIP32C – PNP Epitaxial Silicon Transistor
- KSh 100.00
- Features of TIP32C include; It is a Medium power PNP Transistor Has a DC Current Gain (hFE) of 10 to 50 It's Continuous Collector current (IC) is 3A Collector Emitter voltage (VCE) is 100 V Also has a Collector Base voltage (VCB) is 100V Emitter Base Voltage (VBE) is 5V Lastly, Available in To-220 Package
- Add to cart
-
- Electronic components, Integrated Circuits
TL084CN JFET-Input Operational Amplifiers
- KSh 30.00
- TL084CN incorporates: well-matched, high-voltage JFET and bipolar transistors in a monolithic integrated circuit. It it has high slew rates, low input bias.
- Add to cart
-
- Battery and cells, USB Devices
TP4056 lithium Ion Battery Charger Board 1 A
- KSh 150.00
- Features of DT9205A AC/DC Digital Multimeter High accuracy Large rotational folded LCD display, button release lock Digital height 25mm Single 32 position rotary switch for FUNCTION and RANGE selection, allows fast and convenient operation. Curvilinear mode soft case. Colored indication jack with fully protection test leads. Lower overage power Auto-Power Off Data hold for easy reading
- Add to cart
-
- Capacitors
Trimmer Capacitor 30pf JML06-1-30P DIP Adjustable
- KSh 20.00
- The Single Turn Potentiometer is a three terminal variable resistor. In addition, its circuit system is similar to that used in voltage dividers.
- Add to cart
-
- Sensors
TTP223 Touch Sensor Module ( Capacitive)
- KSh 200.00
- Features of TTP223 Touch Sensor Module Has an operating voltage of between 2.0V to 5.5V The response time max about 60mS at fast mode, 220mS at low power mode @VDD=3V Sensitivity can adjust by the capacitance(0~50pF) outside Have two kinds of sampling length by pad option(SLRFTB pin) Stable touching detection of human body for replacing traditional direct switch key Provides…
- Add to cart
-
- Out of Stock
- Wire
U Shape Solderless Jumper Wires for Breadboard
- KSh 250.00
- These are U Shape Solderless Jumper Wires for Breadboard. In addition to that, it consists of 140 pieces of 14 kinds and 10 strips.
- Read more
-
-
- Electronic components, Integrated Circuits
UA741CP General-Purpose Operational Amplifiers
- KSh 50.00
- UA741CP is a general-purpose operational amplifier featuring offset-voltage null capability. It has a high common-mode input voltage range and no latch up.
- Add to cart
-
- Electronic components, Sensors
Ultrasonic Sensor Module HCSR04
- KSh 250.00
- Features of Ultrasonic Sensor Module HC-SR04  includes; Has a voltage of 5V DC It has a current of 15mA Frequency of 50Hz Resolution of 0.3 cm Lastly, it has a measuring angle of 15 degrees
- Add to cart
-
- Arduino
Uno Prototype expansion shield with Mini-Breadboard
- KSh 200.00
- Uno Prototype expansion shield is compatible with a number of Arduino boards. In addition to that, it has a standard prototying grid and comes with a mini breadboard.
- Add to cart
-
- 3D Assets, Autocad file
UPS 3D autocad free dwg file download
- KSh 0.00
- UPS 3D autocad free dwg file download. This product is dwg file free to download. Once downloaded, you are free to use this product without any restrictions.
- Add to cart
-
- Uncategorized
USB 2.0 Type-A Female Connector
- KSh 50.00
- This is a USB 2.0 Type-A Female Connector. Features of USB 2.0 Type-A Female Connector Type A USB 2.0 Plug (Female) It is a Universal and secure USB protocol Its also a plug and play It can also be used to interface mouse and keyboards to uP/uC To add on, it has a USB power supply of between 100 to…
- Add to cart
-
- USB Devices
USB 2.0 Type-B Female Connector
- KSh 50.00
- This is a USB 2.0 Type-B Female Connector. It is right angled with 4 pins. This product has a metal shield and it’s for PCB mount.
- Add to cart
-
- Uncategorized
USB Charger Adapter for AA AAA Rechargeable Battery
- KSh 500.00
- USB Charger Adapter for AA AAA Rechargeable Ni-MH Battery. Input: USB DC 5V Output: DC 1.4 V, AAA/AA*2=160 mA Color: silver Dimensions: 105 * 34 * 20 mm
- Add to cart
