-
- Sensors
KY-033 Path Tracing Sensor Module
- KSh 150.00
- Specification of KY-033 Path Tracing Sensor It has a Working voltage of DC 3.3V to 5V Has a Working current of ≥ 20mA It has an Operating temperature of between -10℃ to +50℃ In addition, it has a Detection distance of 2 to 40cm Output signal: TTL level (low level there is an obstacle, no obstacle high) Adjustment: adjust multi-turn…
- Add to cart
-
- Photoresistors, Resistors, Sensors
Light Dependent Resistor( LDR photo-resistor) Light Sensor
- KSh 10.00
- Light Dependent Resistor (LDR) is a light sensing device. It has a resistance change depending on the intensity of light that falls on its surface. It is made up of a high resistive semiconductor. The resistance is very high in the dark than it is in the daylight. In addition to that, has an output is in the form of…
- Add to cart
-
- Photoresistors, Resistors, Sensors
Light Dependent Resistor( LDR photo-resistor) Light Sensor
- KSh 50.00
- Light Dependent Resistor (LDR) is a light sensing device. Its resistance change depending on the intensity of light that falls on its surface.
- Add to cart
-
- Out of Stock
- PH sensor
Litmus Paper 80 pieces PH tester with color values
- KSh 200.00
- Litmus Paper is very important when calibrating your analog/digital PH meter. Used to measure full range PH between 1 - 14. It comes with 14 color chart and their respective PH values. The color changes must be matched with the color chart within 15 seconds.
- Read more
-
-
- Out of Stock
- Sensors
Load Cell Weighing Sensor Half-bridge 50 Kg
- KSh 200.00
- Features of Load Cell Weighing Sensor Internal 1000Ohm half-bridge strain gauge load cell, the range is 50kg, half-bridge structure. Widely used in hopper scales, platform scales, platform balance, belt scales, and other electronic weighing devices. widely used in weight scales. When the half-bridge is being stretched, it sends the signal via the red signal wire. Alloy Steel wired weighing load…
- Read more
-
-
- Sensors, Temperature sensor
MAX6675 Thermocouple Temperature Sensor module
- KSh 1,000.00
- MAX6675 is a thermocouple with a cold junction compensation. It has linearity correction, and thermocouple break detection ADC. Also a serial K-type thermocouple, its temperature resolution capability is 0. 25 °. The cold junction compensation range of - 20 to + 80 °. It also has a wide operating voltage range of 3. 0 to 5. 5 V.
- Add to cart
-
- Sensors, Temperature sensor
MAX6675 Thermocouple Temperature Sensor module 5m
- KSh 1,500.00
- MAX6675 is a thermocouple with a cold junction compensation. It has linearity correction, and thermocouple break detection ADC. Also a serial K-type thermocouple, its temperature resolution capability is 0. 25 °. The cold junction compensation range of - 20 to + 80 °. It also has a wide operating voltage range of 3. 0 to 5. 5 V.
- Add to cart
-
- Sensors
MQ-135 Hazardous Gas Detection Sensor
- KSh 400.00
- MQ-135 Hazardous Gas Detection Sensor is used in air quality control equipment. It is suitable for detecting or measuring of NH3, NOx, Alcohol, Benzene, Smoke, CO2. Moreover, its module version comes with a Digital Pin that makes the sensor to operate even without a microcontroller
- Add to cart
-
- Sensors
MQ-2 Smoke Sensor Gas Sensor Detector
- KSh 500.00
- MQ-2 Smoke Sensor Gas Sensor detects/ measures gasses like LPG, Alcohol, Propane, Hydrogen, CO and even methane. Its module version comes with a Digital Pin that makes the sensor to operate even without a microcontroller. When it comes to measuring the gas in ppm the analog pin has to be used, the analog pin also TTL driven and works on…
- Add to cart
-
- Out of Stock
- Sensors
MQ-3 Alcohol Ethanol Gas Sensor Module
- KSh 500.00
- MQ-3 Alcohol Ethanol Gas Sensor is a low cost semiconductor sensor. It can detect the presence of alcohol gases including alcohol, benzine, methane, hexane, CO and LPG.
- Read more
-
-
- Sensors
MQ-4 Methane Gas Sensor Module
- KSh 500.00
- MQ-4 Methane Gas Sensor Module detects the concentration of methane gas in the air then outputs its reading as an analog voltage. The concentration sensing range of 300 ppm to 10,000 ppm is suitable for leak detection. For instance, the sensor could detect if someone left a gas stove on but not lit. It can operate at temperatures from -10…
- Add to cart
-
- Sensors
MQ-5 LPG Natural Gas Coal Sensor
- KSh 500.00
- MQ-5 LPG Natural Gas Coal Sensor is useful for gas leakage detecting. It can detect LPG, i-butane, methane, alcohol, Hydrogen and also smoke.Additionally, it can identify both propane and methane at the same time. Moreover, it has the ability to detect various inflammable gases at lower cost hence making it an ideal choice of different applications of gas detection.
- Add to cart
-
- Sensors
MQ-6 LPG Propane Butane Gas Sensor
- KSh 500.00
- Features of MQ-6 It has a High sensitivity to LPG, iso-butane and propane Has a Fast response It is also Stable with long life In addition to that, it has a Simple drive circuit Lastly, has a 5 V operation voltage
- Add to cart
-
- Sensors
MQ-7 Carbon monoxide gas sensor module
- KSh 400.00
- MQ-7 Carbon monoxide gas sensor module detects the concentrations of CO in the air then outputs its reading as an analog voltage. It can measure concentrations of 10 to 10,000 ppm. Additionally, it can operate at temperatures from -10 to 50°C and consumes less than 150 mA at 5V. It also uses SnO2 material, whose conductivity is lower in clean…
- Add to cart
-
- Sensors
MQ-8 Hydrogen Gas Sensor Module
- KSh 400.00
- MQ-8 Hydrogen Gas Sensor Module has high sensitivity to hydrogen gas. It also has anti-interference to other gases. Additionally, it uses SnO2 material, whose conductivity is lower in clean air. When hydrogen gas exists, the sensor’s conductivity gets higher along with the gas concentration rising.
- Add to cart
-
- Sensors
MQ-9 Combustible gas sensor alarm
- KSh 400.00
- MQ-9 Combustible gas sensor alarm has high sensitivity to Carbon Monoxide, Methane and LPG. It is uses SnO2 material, whose conductivity is lower in clean air. Its conductivity is more higher along with the gas concentration rising. Additionally, it has a high sensitivity to Methane, Propane and CO.
- Add to cart
-
- Arduino, Electronic components, Sensors
Piezoelectric active Buzzer beep sounder for alarm
- KSh 30.00
- Piezoelectric active buzzer adds sound features to your project. It can be easily used on breadboard, Perf Board and even on PCBs. It widely used in electronics. When powered, it will make a beep sound. The sound is due to the internal oscillating circuit inside it.
- Add to cart
-
- Sensors
Pulse sensor heart beat sensor for Arduino
- KSh 700.00
- Pulse sensor is used to test the heart rate. It is used to develop heart related and interactive works. It is worn either on the finger or earlobe.
- Add to cart
-
- Moisture sensors, Sensors
Rain Drop Sensor module for Arduino
- KSh 100.00
- Rain drop sensor module is used for rain detection. It can also be used as a switch when raindrop falls through the raining board.
- Add to cart
-
- Out of Stock
- Arduino, Electronic components, Sensors
RFID Module 13.56MHz RC522 for Arduino
- KSh 500.00
- Features of RFID Module 13.56MHz RC522 includes; MFRC522 chip based board Operating frequency of 13.56MHz Supply Voltage of 3.3V Current of 13-26mA Read Range of 3 cm SPI Interface Moreover, has a max data transfer rate of 10Mbit / s Lastly, it has dimensions of 60mm × 39mm
- Read more
-
-
- Out of Stock
- Humidity Sensor, Sensors, Temperature sensor
Sensor AM2302 DHT22 module Temperature Humidity (JST)
- KSh 3,000.00
- Read more
-
