“315 MHz RF Link Kit transmitter receiver module” has been added to your cart. View cart
-
- Displays, Modules
1602 LCD I2C Module already attached
- KSh 550.00
- 1602 lcd with the i2c Module already attached. This kind of lcd is easy to use because it only need four pins to connect. I recommend it for your project.
- Add to cart
-
- Modules, Sensors
315 MHz RF Link Kit transmitter receiver module
- KSh 200.00
- 315 MHz RF Link Kit is used in wireless communication. Operates at a frequency of 315MHz. It includes a transmitter and a receiver module.
- Add to cart
-
- Modules, Relays, Switches
4 Channel Relay Module 5 V 4 way relay
- KSh 450.00
- Features of 4 Channel Relay Module includes; It has a contact capacity of 250V 10A. Has an On board EL817 photoelectric coupler with photoelectric isolating anti interference ability strong Also has a Long life absorb 100000 times in a row Has a diode current protection and short response time Last but not least, It has a Maximum output of DC…
- Add to cart
-
- Out of Stock
- Modules, Sensors
433MHz RF Wireless Kit STX882 Transmitter Receiver
- KSh 500.00
- Features of 433MHz RF Wireless Kit It has a Frequency Range of 433 MHz. ASK /OOK modulation mode. It has a Super anti power interference. Has a Low power sleep less than 1μA. To add on that, it is Small size. In addition it has a Frequency stability and reliability. It has Various international testing standards. Superheterodyne modulation Last but…
- Read more
-
-
- Modules, Relays, Switches
8 Channel Relay Module 5 V 8 way relay
- KSh 800.00
- Features of 8 Channel Relay Module includes; It has a contact capacity of 250V 10A. Has an On board EL817 photoelectric coupler with photoelectric isolating anti interference ability strong Also has a Long life absorb 100000 times in a row Has a diode current protection and short response time Last but not least, It has a Maximum output of DC…
- Add to cart
-
- Out of Stock
- GPS_GSM_GPRS, Modules
A7 GSM GPRS GPS 3 In 1 Module
- KSh 6,500.00
- Description: Power supply: 5-9V DC Board size: 6 x 4cm Support: Voice, SMS, GPRS, GPS
- Read more
-
-
- Out of Stock
- Modules
Buck Converter 9A 150W 5-40V To 1.2-35V Power module
- KSh 1,000.00
- Fixed turn lamp current is 0.1 times the current value ( Used to identify whether the battery is fully charged When charging). Made from a dedicated benchmark IC and high precision current sensing resistor. Particularly suitable for LED driver. High output current, the max output current can reach 8 A. Four high frequency capacitance, can lower output ripple, enhance the…
- Read more
-
-
- Out of Stock
- Modules
Buck Converter 9A 300W 5-40V To 1.2-35V Power module
- KSh 1,500.00
- Fixed turn lamp current is 0.1 times the current value ( Used to identify whether the battery is fully charged When charging). Made from a dedicated benchmark IC and high precision current sensing resistor. Particularly suitable for LED driver. High output current, the max output current can reach 8 A. Four high frequency capacitance, can lower output ripple, enhance the…
- Read more
-
-
- Out of Stock
- Arduino, Modules
DS3231 Real Time Clock (RTC) Module
- KSh 250.00
- The DS3231 module is an accurate and affordable I2C real-time clock (RTC) with an internal temperature compensated crystal oscillator (TCXO).
- Read more
-
-
- Arduino, Modules, Sensors
GY-521 MPU6050 3 Axis Acceleration Gyroscope
- KSh 400.00
- GY-521 MPU6050 Gyroscope sensor module has an accelerometer and a gyro in a single chip. The sensor uses the I2C-bus to interface with the Arduino.
- Add to cart
-
- Out of Stock
- GPS_GSM_GPRS, Modules
GY-NEO6MV2 GPS Module Flight Control EEPROM
- KSh 800.00
- Read more
-
-
- Out of Stock
- Arduino, Modules
HC05 Bluetooth Transceiver Module for Arduino
- KSh 1,000.00
- Specifications of HC05 Bluetooth Transceiver Module includes; It is a Serial Bluetooth module for Arduino and other microcontrollers Has an Operating Voltage of 4V to 6V (Typically +5V) It has an Operating Current of 30mA Its Range is <100m In addition to that, it Works with Serial communication (USART) and is TTL compatible Also Follows IEEE 802.15.1 standardized protocol To add…
- Read more
-
-
- Arduino, Modules
HC06 Bluetooth Transceiver Module for Arduino
- KSh 1,000.00
- Features of HC06 Bluetooth Transceiver Module includes; Bluetooth protocol: Bluetooth V2.0 protocol standard Power Level: Class2(+6dBm) Has a frequency range of 2.40GHz—2.48GHz, ISM Band It has a Receiver sensitivity of -85dBm USB protocol: USB v1.1/2.0 Modulation mode: Gauss frequency Shift Keying Safety feature: Authentication and encryption It has an Operating voltage range of +3.3V to +6V In addition to that,…
- Add to cart
-
- Modules, Sensors
High Sensitivity Sound Sensor module (Microphone)
- KSh 400.00
- High Sensitivity Sound Sensor module gives a simple way to detect sound and is generally used for detecting sound intensity. Features of Sound Sensor Module Operating voltage of between 3.3V to 5V. PCB size: 3.4cm * 1.6cm. Output model: digital switch outputs (0 and 1, high or low level) Microphone supplies the input to an amplifier, peak detector and buffer.
- Add to cart
-
- Out of Stock
- Distance Sensors, Modules, Sensors
IR Sensor Module Infrared Obstacle Avoidance Sensor
- KSh 400.00
- The IR sensor module consists mainly of the IR Transmitter and Receiver, Opamp, Variable Resistor (Trimmer pot), output LED in brief.
- Read more
-
-
- Arduino, Modules, Motors
L293D expansion board for Arduino motor driver
- KSh 1,000.00
- L293D expansion board for Arduino has the L293D chips. L293D chip is a 4 channel driver. Features includes; Can drive 4 DC motors Up to 2 stepper motors or 2 Servo 4 bi-directional DC motors with individual 8-bit speed selection 4 H-Bridges Pull down resistors A reset button
- Add to cart
-
- Out of Stock
- Modules, Motors
L298N Module DC Stepper Motor Driver
- KSh 500.00
- The Single Turn Potentiometer is a three terminal variable resistor. In addition, its circuit system is similar to that used in voltage dividers.
- Read more
-
-
- LEDs, Modules
Laser Transmitter module KY-008 for Arduino
- KSh 100.00
- Laser Transmitter module KY-008 for Arduino, emits a dot shaped, red laser beam. The module consists of a 650nm red laser diode head and a resistor.
- Add to cart
-
- Displays, Modules
LCD 1602 Keypad Input Output expansion Board
- KSh 400.00
- 1N4737 Zener Diode Electronic Component. It is used in voltage protection circuits. it is also used as low current voltage regulator
- Add to cart
-
- Modules
LM2596 DC-DC Buck Converter Module 1.25 V – 30 V
- KSh 250.00
- Step-down power module 3 A adjustable step-down module LM2576 super regulator Dense vias, heat and strong! Input voltage of DC 3.2V to 35V (input voltage must be higher than the voltage output to 1.5V or more can not be boosted.) Output Voltage Range of 1.25 V to 30 V DC 12 V input, load regulation 5 V 1 A output…
- Add to cart
-
- Arduino, Development Boards, Modules, Programmers
NodeMCU ESP8266 v3 CH340 Lua WIFI Board
- KSh 800.00
- NodeMCU is an open-source Lua based firmware and development Board specially targeted for IoT based Applications. It includes firmware that runs on the ESP8266 Wi-Fi SoC Systems, and hardware which is based on the ESP-12 module. The Board can be easily programmed with Arduino IDE since it is easy to use.
- Add to cart
-
- Modules
Relay Module 1 channel interface Shield
- KSh 150.00
- This Relay Module is 1 channel interface. It complies with the international safety standards. The module can control 220V AC load. It has a normally open and a normally closed contact. The KF301 terminals to the line of control is more convenient.
- Add to cart
-
- Modules, Potentiometers
Rotary Encoder Module for Arduino Incremental
- KSh 100.00
- Rotary Encoder Module is used to measure the rotational speed. It converts the angular motion of a shaft to digital code. Also used for quick speed control with PWM technology. An incremental rotary encoder outputs the corresponding pulses. Hence supports multiple circles of rotation measured. It differs from potentiometer in that the counting is unrestricted.
- Add to cart
-
- Arduino, Modules
Sensor Shield expansion board for arduino
- KSh 500.00
- Features; Ad hoc IIC interface Has a stack design Both analog and digital Interface It has a Servo Controller Interface The sensor has a Bluetooth Module A communication interface SD card module interface module Also has an APC220 RF Module interface Moreover, it has an ultrasonic sensors Interface Lastly, has a 12864 LCD Serial interface
- Add to cart
-
- Out of Stock
- Displays, Modules
Serial I2C module for the Liquid crystal displays (LCDs
- KSh 200.00
- Read more
-
-
- Microcontrollers, Modules, Programmers
STM32 Minimum System Development Board Module
- KSh 700.00
- The STM32 is a family of 32-bit Flash microcontrollers. It is based on the ARM® Cortex®-M processor designed to offer new degrees of freedom to MCU users. It offers a 32-bit product range that with very high performance.
- Add to cart
-
- Modules, Sensors, Vibration sensor
SW-420 Vibration Sensor Module for Arduino
- KSh 150.00
- Features of SW-420 Vibration Sensor Module Has a working voltage of between 3.3 V to 5 V It has a Digital switch output 0 and 1 Also Equipped with fixed bolt hole. Therefore, has a convenient installation Moreover, has a PCB size of 3.2 cm x 1.4 cm LM393 wide voltage comparator Operating Current of 15mA Also has LEDs indicating…
- Add to cart
-
- Modules, Sensors
TCS3200 Color sensor Color recognition module
- KSh 900.00
- Features of TCS3200 Color sensor Input voltage of 2.7V to 5.5V Digital TTL Interface High resolution conversion of light intensity to frequency Programmable colour and full scale output frequency It is directly connected to the digital pins of the microcontroller. Hence no need of ADC Has a Power down feature Working temperature of -40oC to 85oc Programmable color and full-scale…
- Add to cart
