-
- Arduino, Modules, Motors
L293D expansion board for Arduino motor driver
- KSh 1,000.00
- L293D expansion board for Arduino has the L293D chips. L293D chip is a 4 channel driver. Features includes; Can drive 4 DC motors Up to 2 stepper motors or 2 Servo 4 bi-directional DC motors with individual 8-bit speed selection 4 H-Bridges Pull down resistors A reset button
- Add to cart
-
- Integrated Circuits, Motors
L293D Quadruple Half-H Motor Driver Chip
- KSh 200.00
- L293D Quadruple Half-H Motor Driver Chip is a quadruple high current half-H driver. It is designed to provide bidirectional drive currents of up to 600-mA at voltages from 4.5 V to 36 V. Additionally, it can drive inductive loads such as relays, solenoids, DC and bipolar stepping motors, as well as high current/high-voltage loads in positive supply applications.
- Add to cart
-
- Out of Stock
- Modules, Motors
L298N Module DC Stepper Motor Driver
- KSh 500.00
- The Single Turn Potentiometer is a three terminal variable resistor. In addition, its circuit system is similar to that used in voltage dividers.
- Read more
-
-
- LEDs, Modules
Laser Transmitter module KY-008 for Arduino
- KSh 100.00
- Laser Transmitter module KY-008 for Arduino, emits a dot shaped, red laser beam. The module consists of a 650nm red laser diode head and a resistor.
- Add to cart
-
- Photoresistors, Resistors, Sensors
Light Dependent Resistor( LDR photo-resistor) Light Sensor
- KSh 10.00
- Light Dependent Resistor (LDR) is a light sensing device. It has a resistance change depending on the intensity of light that falls on its surface. It is made up of a high resistive semiconductor. The resistance is very high in the dark than it is in the daylight. In addition to that, has an output is in the form of…
- Add to cart
-
- Photoresistors, Resistors, Sensors
Light Dependent Resistor( LDR photo-resistor) Light Sensor
- KSh 50.00
- Light Dependent Resistor (LDR) is a light sensing device. Its resistance change depending on the intensity of light that falls on its surface.
- Add to cart
-
- Voltage regulators
LM1117 voltage regulator Linear Low Dropout
- KSh 100.00
- Features of LM1117 voltage regulator Available in 3.3 V Space Saving SOT 223 and WSON Packages Current Limiting and Thermal Protection Output Current of 800 mA Line Regulation of 0.2 % (Maximum) Load Regulation of 0.4 % (Maximum) Temperature Range of 0 °C to 125 °C
- Add to cart
-
- Electronic components, Voltage regulators
LM317 voltage regulator IC (Three terminal)
- KSh 100.00
- The 7805 voltage regulator is three terminal positive regulator. It is useful in a wide range of applications because of its fixed voltage output. It employs internal current limiting, thermal shut down and safe operating area. If adequate heat sinking is provided, it can deliver over 1A output current.
- Add to cart
-
- Electronic components, Integrated Circuits
LM324N Low-Power, Quad-Operational Amplifiers
- KSh 50.00
- LM324N series consists of four independent, high-gain, internally frequency compensated operational amplifiers. They are designed to operate from a single power supply over a wide range of voltages. Besides, Operation from split-power supplies is also possible. Additionally, low-power supply current drain is independent of the magnitude of the power supply voltage.
- Add to cart
-
- Electronic components, Integrated Circuits
LM358P Industry-Standard Dual Operational Amplifiers
- KSh 50.00
- LM358P circuits consists of two independent, high gain, internally frequency compensated operational amplifiers. They are designed specifically to operate from a single power supply over a wide range of voltages. The low power supply drain is independent of the magnitude of the power supply voltage. In the linear mode the input common-mode voltage range includes ground and the output voltage can…
- Add to cart
-
- Transistors, Voltage regulators
LM7812C voltage regulator IC L7812 (Three terminal)
- KSh 100.00
- LM7812 voltage regulator is three terminal positive regulator. It is useful in a wide range of applications because of its fixed voltage output. It employs internal current limiting, thermal shut down and safe operating area. If adequate heat sinking is provided, it can deliver over 1A output current.
- Add to cart
-
- Arduino, Electronic components, Wire
Male to Female jumper wires 20 cm long
- KSh 180.00
- These are male to female jumper wires that are 20 cm long. In addition to that, this package consists of 40 strands of wires. Each set is 4 times repeated as a single color.
- Add to cart
-
- Electronic components, Wire
Male to Male 20 cm long jumper wires
- KSh 180.00
- These are male to male 20 cm long jumper wires. In addition to that, this package consists of 40 strands of wires. Each set is 4 times repeated as a single color.
- Add to cart
-
- Electronic components, Wire
Male to Male 20 cm long jumper wires 10 pieces
- KSh 50.00
- These are male to male 20 cm long jumper wires. In addition to that, this package consists of 40 strands of wires. Each set is 4 times repeated as a single color.
- Add to cart
-
- Electronic components, Wire
Male to Male jumper wires 10 cm long
- KSh 180.00
- These are male to male jumper wires that are 10 cm long. In addition to that, this package consists of 40 strands of wires. Each set is 4 times repeated as a single color.
- Add to cart
-
- Out of Stock
- Arduino, Electronic components
MAX7219 LED dot Matrix 8×8 module common cathode
- KSh 250.00
- MAX7219 LED dot Matrix module is very easy to use. In addition, it is compatible with a number of microcontrollers including Arduino. The micro-controllers can be connected to this module using the 4-wire serial interface. Moreover, it only needs three i/o data lines, and two power lines to drive. .
- Read more
-
-
- Electronic components, Integrated Circuits
MCP602 (22.7V to 6.0V) Single Supply CMOS
- KSh 100.00
- MCP602 has a gain bandwidth product of 2.8MHz. Besides, it has a low typical operating current of 230µA and an offset voltage that is less than 2mV. Its applications include; A/D Converter Driver Photo Diode Pre-amp Analog Filters Data Acquisition Notebooks and PDAs Sensor Interface
- Add to cart
-
- Out of Stock
- Actuators, Arduino, Electronic components
MG90 metal Gear Microservo Motor
- KSh 400.00
- Features of MG90 metal Gear Microservo includes; Has an Operating Speed of 0.1 s/60 degree (4.8 V), 0.08 s/60 degree (6 V) Has a Stall torque of 1.8 kgf·cm (4.8V ), 2.2 kgf·cm (6 V) Operates at a Temperature Range of -30° to +60° Operating Voltage of 4.8 V -6.0 V Also has metal Gears In addition, it has a dead…
- Read more
-
-
- Switches
Micro Limit Switch Miniature Snap Action Switch.
- KSh 100.00
- Micro Limit Switch is a switch that needs little amount of force to operate and at rapid speed. It is very reliable and fast. To add on that, it is efficient to use.
- Add to cart
-
- Integrated Circuits, Switches
MOC3063 Output Optocoupler Zero cross Triac
- KSh 100.00
- 470uF Radial Electrolytic Capacitor has polarity. That is, it has both a positive and negative pin. The long pin is the positive while the short pin is the negative. Polarity can also be identified using the negative strip on the capacitor label. The negative pin will be directly under the negative symbol.
- Add to cart
-
- Transistors
MPSA42 high voltage NPN Transistor
- KSh 20.00
- Features of MPSA42 High Voltage NPN Transistor DC Current Gain of 40 Continuous Collector current is 500 mA Base- Emitter Voltage of 6V Collector-Emitter Voltage of 300 V Collector-Base Voltage of 300 V Available in To-92 Package
- Add to cart
-
- Transistors
MPSA92 High Voltage PNP Transistor
- KSh 20.00
- Features of MPSA92 include; It is a High Voltage PNP Transistor Has a Collector Emitter voltage (VCE) of 300 V Collector Base voltage (VCB) is 300 V It has an Emitter Base Voltage (VBE) of 5 V In addition its Continuous Collector current (IC) is 500 mA DC Current Gain (hFE), typically 40 when IC = 10 mA Last but…
- Add to cart
