“22 pf Ceramic Capacitor (Value: 22)” has been added to your cart. View cart

“High Sensitivity Water/Moisture Sensor” has been added to your cart. View cart

“100uF Radial Electrolytic Capacitor 50V” has been added to your cart. View cart

“33 uF Radial Electrolytic Capacitor 50 V” has been added to your cart. View cart

“680 pf Ceramic Capacitor (Value: 681)” has been added to your cart. View cart

“6 pf Ceramic Capacitor of (Value: 6)” has been added to your cart. View cart

“330uF Radial Electrolytic Capacitor 25V” has been added to your cart. View cart

“470uF Radial Electrolytic Capacitor 50V” has been added to your cart. View cart

“20 pf Ceramic Capacitor (Value: 20)” has been added to your cart. View cart

“IR proximity sensor (Sharp GP2Y0A21YK)” has been added to your cart. View cart

“47 nf Ceramic Capacitor (Value: 473)” has been added to your cart. View cart

“2.2 nf Ceramic Capacitor (Value: 222)” has been added to your cart. View cart

“300 pf Ceramic Capacitor (Value: 301)” has been added to your cart. View cart

“74HC4040AP 12-stage binary ripple counter” has been added to your cart. View cart

“330uF Radial Electrolytic Capacitor 50V” has been added to your cart. View cart

“CR2032 Coin Cell Button High Capacity Lithium Battery” has been added to your cart. View cart

Voltage Sensor Module for Voltage Detection

KSh 200.00

Features of Voltage Sensor Module includes;

It has an Input Voltage of 0 to 25V
Has a Voltage Detection Range of 0.02445 to 25
An Analog Voltage Resolution of 0.00489V
In addition to that, it needs no external components
Also it is Easy to use with Microcontrollers
To add on that, it is Small, cheap and easily available
Output Interface with “+ ” connected to 5/3.3V and “-” connected GND, “s” connected for Arduino AD pins
DC input interface : red terminal positive with VCC, negative with GND
Lastly, has Dimensions: 4 × 3 × 2 cm

Category: Voltage sensor Tags: module, Voltage sensor

Description
Reviews (0)

Description

Voltage Sensor Module is a simple and very useful module that uses a potential divider to reduce any input voltage by a factor of 5. It is is based on principle of resistive voltage divider design. It allows to use the Analog input pin of a microcontroller to monitor voltages higher than it capable of sensing. In addition, it includes convenient screw terminals for easy and secure connections of a wire.

Features of Voltage Sensor Module includes;

It has an Input Voltage of 0 to 25V
Has a Voltage Detection Range of 0.02445 to 25
An Analog Voltage Resolution of 0.00489V
In addition to that, it needs no external components
Also it is Easy to use with Microcontrollers
To add on that, it is Small, cheap and easily available
Output Interface with “+ ” connected to 5/3.3V and “-” connected GND, “s” connected for Arduino AD pins
DC input interface : red terminal positive with VCC, negative with GND
Lastly, has Dimensions: 4 × 3 × 2 cm

Pin out Configuration

Pin Name	Description
VCC	Positive terminal of the External voltage source (0-25V)
GND	Negative terminal of the External voltage source
S	Analog pin connected to Analog pin of Arduino
+	Not Connected
–	Ground Pin connected to GND of Arduino